Bitumen 80-100 Supplier and Exporter
Iran bitumen penetration grade 80/100 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.Bitumen 80/100 is most used bitumen grade and basic material for all other bituminous products.
Softening point and penetration of bitumen 80-100
Penetration grade bitumen supplied by Iran Bitumen Co. is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by Iran Bitumen Co. is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 80/100 has penetration between 80~100 desi-millimeter and softening point between 45 ~ 52C. The penetration grade bitumen 80/100 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled. This grade of bitumen 60/70 has very strong viscosity compare to other grades.
Guaranty/warranty of Bitumen 80-100 Supplier and Exporter
Iran Bitumen Co. guaranty the quality of bitumen 80/100 with arrangement of international inspector to check quality and quantity of the bitumen during the loading to vessel and controlling the production by QC by batch test report before shipping. Iran Bitumen Co. guaranty the quality to meet with ASTM/EN 12591.
Specification of penetration bitumen 80/100
|Bitumen 80/100||Specification||Test method|
|Penetration @ 25 c||80/100||D.5|
|Softening point c||45/52||D.36|
|Ductility @25 c||100 Min||D.113|
|%Loss on heating(wt)||0.5 Max||D.6|
|Flash point c||225 Min||D.92|
|%Solubility in CS2(wt)||99.5 Min||D.4|
|%Drop in penetration after heating||20 Max||D.5|
|Density @25 c||1.001/1.05||D.70/D.3289|